$20.99 - $17.99
(as of Jan 19,2022 05:22:36 UTC – Details)
Please understand that as the glassware are fragile, the damage will occur during the transit. You can do the following options once got broken product.
1.Contact us for refund. ( If the remaining items are enough to use)
2.Contact Amazon for replacement. ( If replacement is required )
ULAB Glass Beaker Set, Griffin, Low Form, with Spout, Single Scale, 50ml 100ml 250ml 500ml 1000ml
1pc of Magnetic Stir Bar Offered ( Octahedral, Teflon PTFE resin coated. Dia.8mm x L38mm)
Type I Class A – 3.3 Borosilicate Glass
ASTM Reference – E960 Specification for Laboratory Glass Beakers
This product will withstand repeated standard autoclave cycles of 121°C at 15 psi for 5 minutes.
Heating / Cooling:
This product is designed for heating by hot plate, flame, oven, microwave or heating mantles.
In normal service it can be heated many times to 230°C. It can be heated one time to 490°C in extreme service.
This product can be cooled to -230°C. DO NOT plunge product directly into a liquid coolant.
Place the product in the vapor phase of the liquified gasses for slow cooling prior to immersion in the coolant.
Vacuum / Pressure:
This product is not designed for and is not rated for vacuum or pressure applications.
Shipped Not Sterile
1. Buy less than 5pcs?
Save money and see ULAB 3-size glass beaker set on Amazon, search ASIN: B07FCFMW8H.
2. Need plastic beakers?
Search ASIN: B07FDNS7Z2 to get ULAB 5-size plastic beaker set on Amazon.
ULAB Scientific guarantees that no sale is complete unless the customer is satisfied.
If you have any questions or suggestions on our products or service, please do feel free to contact us.
You’ll get our reply within 24 hours. Thanks for your patience.
Is Discontinued By Manufacturer : No
Product Dimensions : 4.13 x 4.13 x 6.22 inches; 9.88 Ounces
Department : Unisex-adult
Date First Available : August 16, 2018
Manufacturer : ULAB Scientific
ASIN : B07FDQBNLS
5 Sizes 50ml 100ml 250ml 500ml 1000ml
3.3 Borosilicate glass, Uniform wall thickness
Extra large marking spot
Tolerance is approximately +/- 5%
ASTM Specification E960, Type I requirements