U.S. Solid 200x0.001g 1mg Digital Analytical Balance Precision Scale for Laboratories


Price: $109.89
(as of Jan 22,2022 08:44:53 UTC – Details)


Product Description

ussolid brandussolid brand

Working in laboratories usually means working with very small quantities of things. Adding a microgram here and taking one away at another place can create a completely different situation for the experimenter. This is why it is very important to measure things as precisely as possible.

This is where the USS-DBS3 Digital Analytical Balance Scale steps in. The analytical scales have been designed to measure quantities in the sub-milligram range. Because those quantities are very small and sensitive to outside influence, all of these scales are equipped with a draft shield to prevent anything from the outside affecting the measurement (sometimes the smallest of breezes can completely change what is being measured).

This particular scale can measure things up to 200 g in weight with the precision of 0.001g. It is an electronic device, and it will display the measure on a LCD display with a backlight. It has the function of Manual Calibration, Parts count,Tare Function, Fault Display, Unit Conversions(ounce, karat, gram, pound).

1mg scale USS-DBS31mg scale USS-DBS3

Specifications

Max Measure Weight: 200 g

Min Measure Weight: 20 mg

Accuracy: 0.001g

Repeatability Error:±0.002 g

Non-linear Error: ±0.002 g

Setting Time: ≤3 seconds

Working Temperature: 5℃~40℃

Weighing plate: φ 90mm

Max Power Consumption: 3 W

Size: 35*24*12.5 cm

Features

• Straing gauge technology

• Stainless steel pan

• Backlit LCD display

• Plastic draft shield

• Height-adjustable feet

• Taring

• Four different units of measure: g, lb, ct, oz

• Piece counting function

panel for USS-00003

panel for USS-00003

battery for uss-00003

battery for uss-00003

Package List for USS-00003

Package List for USS-00003

Panel Explanations

ON/OFF: Turns device on and offUNIT: Select between ct, oz, lb, gPCS: Piece counting modeCAL: Calibration keyTARE/ZERO: Tare the balance

Power Supply

Both AC and DC power supplies:

AC: 110 V – 220 VDC: 9 V battery

Package List

1 x Scale1 x Weighing Pan (stainless steel)1 x Wind Shield (plastic)1 x US Power Cable1 x 100 g Weight1 x Manual

Frequently Asked Questions

How to Calibrate the Balance?

1. Press and hold down CAL key, when it shows “CAL” on display, release the keys; then value of the necessary weight will flash on display.

2. Put the calibration weight on the pan. Wait until the value of the calibration weight stops flashing and is fixed on the display (e.g. 1000.00 g, 2000.00g, etc., depending on the model).

3. Remove the weight from the pan

4. The balance will enter weighing mode and will display 0.00g

Our Service

All the scales are tested before shipping.

Our company based in Cleveland, Ohio. Within the first 30 days after the date of delivery, U.S. Solid will either work with you to get your product working with the use of replacement parts, or replace the product after receiving the return of the defective item.

Max. Capacity
100 g 200 g 300 g 100 g 300 g 300 g

Min. Capacity
20 mg 20 mg 20 mg 20 mg 20 mg 20 mg

Accuracy
0.001g / 1 mg 0.001g / 1 mg 0.001g / 1 mg 0.001g / 1 mg 0.001g / 1 mg 0.001g / 1 mg

Repeatability Error
±0.002 g ±0.002 g ±0.002 g ±0.002 g ±0.002 g ±0.002 g

Non-linear Error
±0.002 g ±0.002 g ±0.002 g ±0.002 g ±0.002 g ±0.002 g

Is Discontinued By Manufacturer ‏ : ‎ No
Package Dimensions ‏ : ‎ 13 x 11 x 6.1 inches; 7.05 Ounces
Date First Available ‏ : ‎ August 20, 2015
Manufacturer ‏ : ‎ U.S. Solid
ASIN ‏ : ‎ B0146B55VW

Measurement: 200 g Rang; 0.001 g (1 mg) resolution; ±0.002 g Accuracy
With Unit conversion: ounce, karat, gram, pound
Both AC/ DC power supply
With manual calibration, tare function, part count function
LCD Display with backlight

Leave a Reply

Your email address will not be published. Required fields are marked *