Tripp Lite 4x4 HDMI Over Cat5 / Cat6 Matrix Splitter Switch , Transmitter for Video and Audio, 1920x1200 1080p at 60Hz(B126-4X4) , Black

Price: $348.79
(as of Aug 19,2022 09:46:30 UTC – Details)

Tripp Lite B126-4X4 allows Four HDMI video sources ( DVR, Cable box, etc. ) to be shared among multiple monitors, over ordinary Cat5e/Cat6 cable. When used with Tripp Lite Active HDMI receivers, can extend a 1080P signal up to 125ft, and 1080i up to 175ft. Allows any Input to be routed to any Output; or the same Input to be routed to multiple outputs. Switch between inputs via pushbuttons, remote control, or RS232 serial. Four monitors can be supported with the basic switch further expand the range and number of monitors by adding B126-110 remote repeater units. Use 24AWG, Solid Wire Cat5e/6 cable, such as Tripp Lite’s N202-Series, to achieve maximum distance and resolution. A 1080p at 60Hz signal can be extended up to 125 ft. for each repeater added into a channel (or up to 175 ft. for a 1080i at60Hz signal). For longer distances: Use a B126-1A0 or B126-1A0-WP-1 active remote receiver to extend a 1080p at 60Hz signal up to 125 ft. from the transmitter (or a 1080i at 60Hz signal up to 175 ft. from the transmitter). For shorter distances: Use a B126-1P0 or B126-1P0-WP-1 passive remote receiver to extend a 1080p at 60Hz signal up to 50 ft. from the transmitter (or a 1080i at 60Hz signal up to 75 ft. from the transmitter).
4 x 4 MATRIX SPLITTER SWITCH: Works with Tripp Lite’s B126-Series receivers to share multiple HDMI sources between multiple monitors, each on a single Cat5e/6 cable, up to 175 ft. away. Ideal for digital signs, trade shows, retail and presentations.
EXTENDS HDMI OVER CAT5/CAT6: When used with Tripp Lite’s B126-1A0 or B126-1A0-WP-1 active remote receivers, the switch can extend a 1080i (60 Hz) signal up to 175 feet or a 1080p signal (60 Hz) up to 125 feet.
TRANSMITTER WITH VIDEO & AUDIO: Supports high-definition video resolutions up to 1080p (60 Hz). In addition to crystal-clear video, the B126-4X4 delivers full, rich stereo. Works with all operating systems and HDMI video sources.
TAA-COMPLIANT & EASY TO USE: Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases. Easily switch between inputs via pushbuttons, RS-232 serial or the included remote control. HDMI over Cat5/Cat6 Matrix Splitter Switch is plug and play—no software or drivers to install.

Leave a Reply

Your email address will not be published.