192.168.0.1 or jiofi local HTML is the most popular IP address that we would have come across while configuring a modem and routers for a proper internet connection. It is the default gateway used by the routers and modems as their default IP address to log in to the admin panel.

If you are planning to configure any basic or advanced settings we shall be using this. Let us now see how to login to 192.168.0.1

Default admin logins for 192.168.0.1

IP Address: 192.168.0.1
Username: admin
Password: admin

IP Address: 192.168.0.1
Username: ‘randomly generated”
Password: admin

IP Address: 192.168.0.1
Username: admin
Password: –

IP Address: 192.168.0.1
Username: –
Password: admin

IP Address: 192.168.0.1
Username: admin
Password: airline

192.168.0.1 Login Steps

Follow the below-mentioned steps to log in to 192.168.0.1

  • Step 1: For you to log in first, please ensure that your device is connected to the internet. It can be connected through wireless or ethernet cable also. Once you have confirmed this go on to the next step
  • Step 2: Open the web browser on your PC that you normally used to browse the internet. It can be Mozilla, Internet Explorer or Google Chrome too
  • Step 3: Type the below mentioned on the Address bar of the web browser: http://192.168.0.1. Once you type this, you will find a login page of the router or the modem that shall appear on the screen.
  • Step 4: Please enter the default user name and password in the required fields.
log in to 192.168.0.1
Enter password for 192.168.0.1

As the authentication gets validated, you are now logged into the configuration page of the router or the modem. Any changes that you prefer can be done now.

If you are wondering what shall be the user name and password. The default settings have the user name and password as ‘admin’. It can be used for both and the authentication can be validated and confirmed too. Likewise, there are a few common and default user names and passwords are given. You can use them for respective routers.

If you use the combinations and you find it difficult to log in as it is not validated. It is suggested to contact the internet service provider or reset the router to its factory settings. This can be useful so that you can use the default user name and password.

The reset button shall be available in the bottom of the router normally. Ensure that the router is powered on while you reset it. Use a paper clip and press it against the reset button for close to 10 seconds. You are advised to wait for 30 more seconds once you are done with that. The LED indicators shall blink and come back to normal steady ones.

Conclusion

192.168.0.1 is a default gateway for many devices. It is also found that there are around 21 companies resort to this IP address. The best fact about this IP is, there is no possibility that you can forget the user name or the password. All it requires is a username as Admin and place the password blank. Further, the configuration becomes easy too.

Leave a Reply

Your email address will not be published. Required fields are marked *